INT 14h,  03h (3)        Get Serial Port Status

    Returns line status and modem status information for a specified
    serial port.

       On entry:      AH         03h
                      DX         Serial port number (0 - COM1, 1 - COM2, etc.)

       Returns:       AX         Line and Modem status (See below)

  --------------------------------------------------------------------------

    Status information is returned in AX, as follows:

             AH (Line status)
            7 6 5 4 3 2 1 0
            1 . . . . . . .       Time-out error
            . 1 . . . . . .       Transfer shift register empty
            . . 1 . . . . .       Transfer holding register empty
            . . . 1 . . . .       Break-detect error
            . . . . 1 . . .       Framing error
            . . . . . 1 . .       Parity error
            . . . . . . 1 .       Overrun error
            . . . . . . . 1       Data ready

             AL (Modem status)
            7 6 5 4 3 2 1 0
            1 . . . . . . .       Received line signal detect
            . 1 . . . . . .       Ring indicator
            . . 1 . . . . .       Data set ready
            . . . 1 . . . .       Clear to send
            . . . . 1 . . .       Change in receive line signal detected
            . . . . . 1 . .       Trailing edge ring detector
            . . . . . . 1 .       Change in data set ready
            . . . . . . . 1       Change in clear to send

    If bit 7 of the Line status byte (AH) is set, then the rest of the
    bits in AH and AL are unpredictable.


       Notes:         Early versions of the ROM-BIOS for the original PC
                      had a programming error that would cause "time-out"
                      errors to be reported as "transfer shift register
                      empty" and "break-detect" errors. This has been
                      corrected in all other versions of the ROM-BIOS.